Project Information
Overview
Hindustan” brand crane duty motors are specially designed for frequent starts/stops & reversing required in cranes & lifts of all types. They can also be used in applications such as material handling, weirs & sluices, auxiliary motors in rolling mills or wherever intermittent drives are required.
Hindustan Crane Duty Motor brochure
Technical Specification
Features
Technical Specification
- kW : 0.18 to 200.0 kW
- RPM : 1500, 1000, 750
- Mounting : Foot (B3), flange (B5), face (B14) & combinations
- Frame : 71 to 315L
- Voltage : 415V ± 10% or as required
- Frequency : 50Hz ± 5% or as required
- Ambient : 45°C
- Altitude : upto 1000m above msl
- Rotor type : Squirrel cage aluminium die cast
- Enclosure : Totally enclosed fan cooled (TEFC)
- Protection : IP55
- Insl. class : Class F insulation with temp. rise limited to class B
- Duty cycle : S3, S4 & S5
- Standards : IS: 325, IS: 1231, IS: 2223 & IS: 4722
Features
Castings: “Hindustan” crane duty motors’ housings & endshields are made from high quality castings as per IS: 210. All components are machined to correct accuracy & alignment.
Stampings: The stampings are made from low loss high permeability steel.
Terminal Box: Standard location of terminal box is on top. However the terminal box on right or left side can be provided on request. The terminal box can be rotated in steps of 90° in each position. Motors up to 250 frames have aluminium boxes whereas frames 280 & 315 are with cast iron terminal boxes.
Winding & Protection: All motors are wound with super enameled dual coat copper wires. This enable motors to be used for inverter applications as well. Features like vacuum pressure impregnation (VPI) & PTC thermisters embedded in stator winding can be provided on request.
Earthing terminals: Two earthing terminals are provided, one in the terminal box & other on the motor body. Anti-condensation Heater: To avoid moisture accumulation inside the motor, the motor windings can be heated by connecting 4-10% of rated voltage to the motor terminals.